NA-CONNECT – Tubes Technologies https://tubes-technologies.com Transfert de fluides et gaz purs et équipements de cuves aseptiques Thu, 29 Oct 2026 10:34:51 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.4 NA Connect® In-Line Clamp Millipore NovAseptic® https://tubes-technologies.com/en/produit/na-connect-in-line-clamp-millipore-novaseptic/ https://tubes-technologies.com/en/produit/na-connect-in-line-clamp-millipore-novaseptic/#respond Wed, 28 Oct 2026 16:27:45 +0000 https://tubes-technologies.com/?post_type=product&p=8789  

The in-line NA Connect® flange is a registered and protected trademark of Merck NovaSeptic®.

 

 

NA Connect® stands for Novaseptic Connection!

 

 

This flange, invented by Novaseptic®, makes it possible to position a clamp ferrule, clamp-connected instrumentation or a clamp sampling valve as close and as flush as possible on process piping.

 

 

The in-line NA Connect flange minimises the gap between the clamp ferrule carrying the instrumentation and the flow line in the piping.

 

 

Made in France, it combines the following features:

 

 

Material:

        • 316L 1.4435BN2 using Ugitech raw stock

 

        • Available in Hastelloy C22, Al6Xn, 904l, Uranus B6

 

        • Pressure from -1 to 7 bar(g), temperature from -80°C to 200°C

 

        • Ra<0.4µm, available with Ra<0.4µm electropolished.

 

 

Dimensions:

 

SMS on the instrumentation support

 

ASME BPE on the process line

 

Weld-end or clamp connection

 

 

 

 

In-line Tri Clamp NA Connect data sheet to ASME BPE

 

 

]]> https://tubes-technologies.com/en/produit/na-connect-in-line-clamp-millipore-novaseptic/feed/ 0 NA Connect® In-Line Weld-End Millipore NovAseptic® https://tubes-technologies.com/en/produit/na-connect-in-line-weld-end-millipore-novaseptic/ https://tubes-technologies.com/en/produit/na-connect-in-line-weld-end-millipore-novaseptic/#respond Wed, 28 Oct 2026 16:27:28 +0000 https://tubes-technologies.com/?post_type=product&p=8788 In-line weld-end NA Connect data sheet to ASME BPE

 

The in-line NA Connect® flange is a registered and protected trademark of Merck NovaSeptic®.

 

 

NA Connect® stands for Novaseptic Connection!

 

 

This flange, invented by Novaseptic®, makes it possible to position a clamp ferrule, clamp-connected instrumentation or a clamp sampling valve as close and as flush as possible on process piping.

 

 

The in-line NA Connect flange minimises the gap between the clamp ferrule carrying the instrumentation and the flow line in the piping.

 

 

Made in France, it combines the following features:

 

 

Material:

        • 316L 1.4435BN2 using Ugitech raw stock

 

        • Available in Hastelloy C22, Al6Xn, 904l, Uranus B6

 

        • Pressure from -1 to 7 bar(g), temperature from -80°C to 200°C

 

        • Ra<0.4µm, available with Ra<0.4µm electropolished.

 

 

Dimensions:

 

SMS on the instrumentation support

 

ASME BPE on the process line

 

Weld-end or clamp connection

]]> https://tubes-technologies.com/en/produit/na-connect-in-line-weld-end-millipore-novaseptic/feed/ 0 NA Connect® Millipore NovAseptic® Tank Flanges https://tubes-technologies.com/en/produit/na-connect-millipore-novaseptic-tank-flanges/ https://tubes-technologies.com/en/produit/na-connect-millipore-novaseptic-tank-flanges/#respond Wed, 28 Oct 2026 16:27:12 +0000 https://tubes-technologies.com/?post_type=product&p=8787 NA Connect data sheet to ASME BPE

 

NA Connect data sheet to ASTM A270

 

NA Connect data sheet to DIN1850

 

NA Connect data sheet to ISO1127

 

NA Connect data sheet to SMS3008

 

The in-line NA Connect® flange is a registered and protected trademark of Merck NovaSeptic®.

 

 

NA Connect® stands for Novaseptic Connection!

 

 

This flange, invented by Novaseptic®, makes it possible to position a clamp ferrule, clamp-connected instrumentation or a clamp sampling valve as close and as flush as possible on process piping.

 

 

The in-line NA Connect flange minimises the gap between the clamp ferrule carrying the instrumentation and the flow line in the piping.

 

 

Made in France, it combines the following features:

 

 

Material:

        • 316L 1.4435BN2 using Ugitech raw stock

 

        • Available in Hastelloy C22, Al6Xn, 904l, Uranus B6

 

        • Pressure from -1 to 7 bar(g), temperature from -80°C to 200°C

 

        • Ra<0.4µm, available with Ra<0.4µm electropolished.

 

 

Dimensions:

 

SMS on the instrumentation support

 

ASME BPE on the process line

 

Weld-end or clamp connection

]]> https://tubes-technologies.com/en/produit/na-connect-millipore-novaseptic-tank-flanges/feed/ 0