ASME BPE 0.38 µm SF4 – Tubes Technologies https://tubes-technologies.com Transfert de fluides et gaz purs et équipements de cuves aseptiques Thu, 29 Oct 2026 10:36:19 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.4 DT-4.1.1-5 (DT-13) ASME BPE SF4 45° Elbow https://tubes-technologies.com/en/produit/dt-4-1-1-5-dt-13-asme-bpe-sf4-45-elbow/ https://tubes-technologies.com/en/produit/dt-4-1-1-5-dt-13-asme-bpe-sf4-45-elbow/#respond Wed, 28 Oct 2026 15:52:44 +0000 https://tubes-technologies.com/?post_type=product&p=8694 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-1-5-dt-13-asme-bpe-sf4-45-elbow/feed/ 0 DT-4.1.1-4 (DT-8) ASME BPE SF4 45° Elbow https://tubes-technologies.com/en/produit/dt-4-1-1-4-dt-8-asme-bpe-sf4-45-elbow/ https://tubes-technologies.com/en/produit/dt-4-1-1-4-dt-8-asme-bpe-sf4-45-elbow/#respond Wed, 28 Oct 2026 15:52:39 +0000 https://tubes-technologies.com/?post_type=product&p=8692 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-1-4-dt-8-asme-bpe-sf4-45-elbow/feed/ 0 DT-4.1.1-1 (DT-7) ASME BPE SF4 90° Elbow https://tubes-technologies.com/en/produit/dt-4-1-1-1-dt-7-asme-bpe-sf4-90-elbow/ https://tubes-technologies.com/en/produit/dt-4-1-1-1-dt-7-asme-bpe-sf4-90-elbow/#respond Wed, 28 Oct 2026 15:52:15 +0000 https://tubes-technologies.com/?post_type=product&p=8688 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-1-1-dt-7-asme-bpe-sf4-90-elbow/feed/ 0 DT-4-1 (DT-1) -ASME BPE SF4 Tube https://tubes-technologies.com/en/produit/dt-4-1-dt-1-asme-bpe-sf4-tube/ https://tubes-technologies.com/en/produit/dt-4-1-dt-1-asme-bpe-sf4-tube/#respond Wed, 28 Oct 2026 15:52:05 +0000 https://tubes-technologies.com/?post_type=product&p=8685 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

 

]]> https://tubes-technologies.com/en/produit/dt-4-1-dt-1-asme-bpe-sf4-tube/feed/ 0 DT-4.1.2-1 (DT-9) ASME BPE SF4 Cross https://tubes-technologies.com/en/produit/dt-4-1-2-1-asme-bpe-sf4-cross/ https://tubes-technologies.com/en/produit/dt-4-1-2-1-asme-bpe-sf4-cross/#respond Wed, 28 Oct 2026 15:50:17 +0000 https://tubes-technologies.com/?post_type=product&p=8651 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-1-asme-bpe-sf4-cross/feed/ 0 DT-4.1.5-2 (DT-31) ASME BPE SF4 Clamp Cap https://tubes-technologies.com/en/produit/dt-4-1-5-2-asme-bpe-sf4-clamp-cap/ https://tubes-technologies.com/en/produit/dt-4-1-5-2-asme-bpe-sf4-clamp-cap/#respond Wed, 28 Oct 2026 15:50:12 +0000 https://tubes-technologies.com/?post_type=product&p=8649 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

]]> https://tubes-technologies.com/en/produit/dt-4-1-5-2-asme-bpe-sf4-clamp-cap/feed/ 0 4.1.3-3 (DT-21) – ASME BPE SF4 Concentric Reducer TC/TC https://tubes-technologies.com/en/produit/4-1-3-3-asme-bpe-sf4-concentric-reducer-tc-tc/ https://tubes-technologies.com/en/produit/4-1-3-3-asme-bpe-sf4-concentric-reducer-tc-tc/#respond Wed, 28 Oct 2026 15:50:08 +0000 https://tubes-technologies.com/?post_type=product&p=8647 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/4-1-3-3-asme-bpe-sf4-concentric-reducer-tc-tc/feed/ 0 DT-4.1.2-8 (DT-19) ASME BPE SF4 Reducing Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-8-asme-bpe-sf4-reducing-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-8-asme-bpe-sf4-reducing-tee-ccc/#respond Wed, 28 Oct 2026 15:50:04 +0000 https://tubes-technologies.com/?post_type=product&p=8645 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-8-asme-bpe-sf4-reducing-tee-ccc/feed/ 0 DT-4.1.2-4 (DT-18) ASME BPE SF4 Equal Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-4-asme-bpe-sf4-equal-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-4-asme-bpe-sf4-equal-tee-ccc/#respond Wed, 28 Oct 2026 15:50:00 +0000 https://tubes-technologies.com/?post_type=product&p=8643 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-4-asme-bpe-sf4-equal-tee-ccc/feed/ 0 DT-4.1.1-7 (DT-23) ASME BPE SF4 180° Elbow https://tubes-technologies.com/en/produit/dt-4-1-1-7-asme-bpe-sf4-180-elbow/ https://tubes-technologies.com/en/produit/dt-4-1-1-7-asme-bpe-sf4-180-elbow/#respond Wed, 28 Oct 2026 15:49:55 +0000 https://tubes-technologies.com/?post_type=product&p=8641 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene sleeves with capped ends.

Tubes are oxygen-degreased in accordance with ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-1-7-asme-bpe-sf4-180-elbow/feed/ 0