Life Science – Tubes Technologies https://tubes-technologies.com Transfert de fluides et gaz purs et équipements de cuves aseptiques Thu, 29 Oct 2026 10:32:25 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.4 DT-4.1.2-11 (DT-29) ASME BPE SF1 Instrument Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-11-dt-29-asme-bpe-sf1-instrument-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-11-dt-29-asme-bpe-sf1-instrument-tee-ccc/#respond Wed, 28 Oct 2026 15:54:38 +0000 https://tubes-technologies.com/?post_type=product&p=8716 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-11-dt-29-asme-bpe-sf1-instrument-tee-ccc/feed/ 0 DT-4.1.2-10 (DT-28) ASME BPE SF1 Instrument Tee https://tubes-technologies.com/en/produit/dt-4-1-2-10-dt-28-asme-bpe-sf1-instrument-tee/ https://tubes-technologies.com/en/produit/dt-4-1-2-10-dt-28-asme-bpe-sf1-instrument-tee/#respond Wed, 28 Oct 2026 15:54:33 +0000 https://tubes-technologies.com/?post_type=product&p=8715 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-10-dt-28-asme-bpe-sf1-instrument-tee/feed/ 0 DT-4.1.2-9 (DT-20) ASME BPE SF1 Short Reducing Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-9-dt-20-asme-bpe-sf1-short-reducing-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-9-dt-20-asme-bpe-sf1-short-reducing-tee-ccc/#respond Wed, 28 Oct 2026 15:54:26 +0000 https://tubes-technologies.com/?post_type=product&p=8714 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-9-dt-20-asme-bpe-sf1-short-reducing-tee-ccc/feed/ 0 DT-4.1.2-8 (DT-19) ASME BPE SF1 Reducing Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-8-dt-19-asme-bpe-sf1-reducing-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-8-dt-19-asme-bpe-sf1-reducing-tee-ccc/#respond Wed, 28 Oct 2026 15:54:14 +0000 https://tubes-technologies.com/?post_type=product&p=8712 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-8-dt-19-asme-bpe-sf1-reducing-tee-ccc/feed/ 0 DT-4.1.2-7 (DT-14) ASME BPE SF1 Reducing Tee BW/TC https://tubes-technologies.com/en/produit/dt-4-1-2-7-dt-14-asme-bpe-sf1-reducing-tee-bw-tc/ https://tubes-technologies.com/en/produit/dt-4-1-2-7-dt-14-asme-bpe-sf1-reducing-tee-bw-tc/#respond Wed, 28 Oct 2026 15:54:08 +0000 https://tubes-technologies.com/?post_type=product&p=8710 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-7-dt-14-asme-bpe-sf1-reducing-tee-bw-tc/feed/ 0 DT-4.1.2-6 (DT-10) ASME BPE SF1 Reducing Tee https://tubes-technologies.com/en/produit/dt-4-1-2-6-dt-10-asme-bpe-sf1-reducing-tee/ https://tubes-technologies.com/en/produit/dt-4-1-2-6-dt-10-asme-bpe-sf1-reducing-tee/#respond Wed, 28 Oct 2026 15:54:03 +0000 https://tubes-technologies.com/?post_type=product&p=8709 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-6-dt-10-asme-bpe-sf1-reducing-tee/feed/ 0 DT-4.1.2-5 (DT-27) ASME BPE SF1 Short Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-5-dt-27-asme-bpe-sf1-short-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-5-dt-27-asme-bpe-sf1-short-tee-ccc/#respond Wed, 28 Oct 2026 15:53:49 +0000 https://tubes-technologies.com/?post_type=product&p=8706 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-5-dt-27-asme-bpe-sf1-short-tee-ccc/feed/ 0 DT-4.1.2-4 (DT-18) ASME BPE SF1 Cross CCCC https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-cross-cccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-cross-cccc/#respond Wed, 28 Oct 2026 15:53:43 +0000 https://tubes-technologies.com/?post_type=product&p=8705 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-cross-cccc/feed/ 0 DT-4.1.2-4 (DT-18) ASME BPE SF1 Equal Tee CCC https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-equal-tee-ccc/ https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-equal-tee-ccc/#respond Wed, 28 Oct 2026 15:53:37 +0000 https://tubes-technologies.com/?post_type=product&p=8703 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-4-dt-18-asme-bpe-sf1-equal-tee-ccc/feed/ 0 DT-4.1.2-3 (DT-25) ASME BPE SF1 Equal Tee with Short Outlet BW/TC https://tubes-technologies.com/en/produit/dt-4-1-2-3-dt-25-asme-bpe-sf1-equal-tee-with-short-outlet-bw-tc/ https://tubes-technologies.com/en/produit/dt-4-1-2-3-dt-25-asme-bpe-sf1-equal-tee-with-short-outlet-bw-tc/#respond Wed, 28 Oct 2026 15:53:31 +0000 https://tubes-technologies.com/?post_type=product&p=8702 ASME BPE range, Dockweiler – Tubes and fittings for pharmaceutical fluids

 

View specifications

 

Tubes and Fittings Data Sheet

 

Dockweiler Catalogue

 

The ASME BPE range is designed for conveying clean fluids in the pharmaceutical and biotechnology industries.

 

It meets the requirements of pre-treated water networks, non-oxidising products and sterile compressed air, as well as process skid manufacturing.

 

Surface finishes and hygienic classes

 

Finish Code Internal Ra External Ra
SF1 – Mechanically polished SF1 ≤ 0.51 µm (20 µin) < 0.8 µm
SF4 – Electropolished SF4 ≤ 0.38 µm (15 µin) < 0.8 µm

 

Material

 

AISI 316L stainless steel with controlled sulphur content, ensuring optimum weldability.

 

Dimensional standards

 

The ASME BPE code incorporates the Imperial dimensional standard (compliant with DIN 11866 series C)

 

Traceability and packaging

 

Each component is supplied with its 3.1 material certificate.

Tubes and fittings are marked (grade, batch number, heat number, dimensions).

Fittings are packed in individual polyethylene bags with capped ends.

Tubes are oxygen-degreased according to ASTM A632 S3.

]]> https://tubes-technologies.com/en/produit/dt-4-1-2-3-dt-25-asme-bpe-sf1-equal-tee-with-short-outlet-bw-tc/feed/ 0